Conduit drain plug

Drains. Standard Materials: • Bodies, and inspection or drain covers –. Mfr Number: SSTC1. Facilitates modifications,. 10(1pc). It has the capability to pass 50 cc of water per minute and Appleton Group's hazardous location drain and breathers are used where condensation may be a problem. UNILETS for Use with Threaded Metal Conduit. • At least one breather should be used with each drain. Eaton's Crouse-Hinds series breather plug, condensation breather, and drain provides ventilation or drainage for enclosures or conduit systems. Where there is a probability that liquid or other condensed vapor may be trapped within enclosures for control equipment or at any point in the raceway system, approved means – such as installation of (Drain/Seal for Vertical Conduit). MFG: Eaton Crouse Hinds. 750". ECD drains and breathers are installed in enclosures or conduit systems to: Provide ventilation to minimize condensation. Product Type: Replacement Parts, Includes: T handle. 2", S62000CSHP, 1. ExplosionproofFittings Explosionproof Fittings (160) Bushings-K-O-Seals-Locknuts Bushings / K. *Turning radius with plug removed. Feraloy iron alloy and/or ductile iron. EY VERTICAL Breather / Drain Plug, Globally Approved, Explosive Atmosphere Cable / Conduit Accessory. true Per NEC 501. SeaSense. JB-DRAIN-PLUG-. 1", S61500CSHP, 1. • Small closure plug – Feraloy iron alloy. Fittings are suitable for both hazardous and ordinary locations, along with conductive and non-conductive thread and joint lubricants. O. 375". com. Feraloy® iron alloy and/or ductile iron. • A breather is installed in top of enclosure or upper section of conduit system. Brand Name: SeaSense. UNILETS® for Use with Threaded Metal Conduit. • Closure for drain – copper-free aluminum or ductile iron. From the Manufacturer. Unions, Sealing Fittings, Flexible Couplings,. I-2. This Twist Drain Plug tightens in place with a clockwise rotation of the "T" handle. Overall Height: 2 inch, Overall Depth: 1 inch. Water/condensation accumulates in conduits but drain fittings often plug due to oil, metal shavings, Oct 4, 2008 the intent is to leave off the drain fitting at the end of a "tee" fitting on the bottom of a vertical conduit run that is part of a cable tray raceway. Knock out the drain plug from the disposal. Applications: Unions. 1000 ft reel. • Small closure plug – Feraloy iron alloy. 15(C)(6), seals in Class I, Division 1 and 2 must be limited to conductor fill of 25% of cross sectional area of a rigid metal conduit of the same trade size unless approved for higher percentage fill. EY 25 Percent Fill Vertical Horizontal Conduit Sealing Fittings for Close Turning Radius. 63 | Dimensions 4 in Dia Color Yellow Material Vinyl | Shop online at www. PVC insulation; for use as RS-485 bus. EYS with Nipple . Thomas & Betts ECD15-TB Drain/Breather; 1/2 Inch, Stainless Steel. Part Number. www. ", S60500CSHP, 0. Standard Materials: • Bodies, and inspection or drain covers –. Universal Breather or Drain Conduit fitting for hazard locations. • A "standard" drain is installed in Trade Size. Seals / Locknuts (41) PVCCoatedFittings PVC Coated Fittings (25) PVCFittings PVC Fittings (21) · ConduitHubs Conduit Hubs (14) Nipples-RunningThread-Enlargers Nipples, Running Thread, Enlargers (4) ConduitBodies Jun 4, 2008 "the intent is to leave off the drain fitting at the end of a "tee" fitting on the bottom of a vertical conduit run that is part of a cable tray raceway. Drain accumulated condensate. appletonelec. Appleton Group's hazardous location drain and breathers are used where condensation may be a problem. 1", S61200CSHP, 0. 6", S66000CSHP, 1. Elbows, Drain/Breather, Close-Up Plugs: Explosionproof. ", S60700CSHP, 0. . a. This component is an electrical device that must be installed correctly to ensure proper operation and to prevent shock or fire. EYS. The installation is outdoors and/or in a wash down area indoors. 000" Twist Lock Plugs & Connectors · Single Pole Plugs & Connectors. 000". Log In to view your pricing · Need to register for an account? G. Cooper Crouse-Hinds SSTC1 Drain Plug, Non-Hazardous, Size: 1/2", Aluminum. The Crouse-Hinds ECD15 1/2-Inch Universal Drain Breather provides ventilation to minimize condensation. Water/condensation accumulates in conduits but drain fittings often plug due to oil, metal shavings, dust Product description. • Barrier for sealing compound easily installed after dams are made and before compound is poured. All W22 Motors are fitted with rubber drain plugs that allow continuous condensed water draining from the motor (drain plug at open position IP55). 1", S61000CSHP, 0. These O-Z/Gedney drain/sealing fittings minimize the passage of gases and vapors and prevent the passage of flames from one portion of an electrical system to another through the conduit. The Perception Kayak Drain Plug is the replacement drain plug for Perception Kayaks. Order Oil Drain Plug for your vehicle and pick it up in store today. Drain Plug | PLUG4 | $166. ① Turning radius with cover or plug removed. • A breather is installed in top of enclosure or upper section of conduit system. bradyid. Shop for Conduit Drain Plugs from Platt Electric Supply. PN 278621 (recommended for Division 2 locations). 4", S64000CSHP, 1. • A "standard" drain is installed in ECDs are installed in enclosures or conduit to provide ventilation to minimize condensation and drain condensate; Standard - installed in bottom of enclosure or in lower section of conduit system; Universal - functions as a breather when mounted at the top of an enclosure, or as a drain when mounted in the bottom of an Product description. *Images are representative of products listed and may not be Shielded cable with twisted pair of 22 AWG wires;. • Closure for drain – copper-free aluminum or ductile iron. Free shipping on all orders $75+. It has the capability to pass 50 cc of water per minute and inspection of seals. Aluminum Pipe Plugs · Black Pipe Plugs · Brass Pipe Plugs · Galvanized Pipe Plugs · Industrial Pipe Plugs · Plastic Pipe Plugs · Stainless Steel Pipe Plugs · Drain Home · Fittings · Conduit Hubs · Conduit Hubs - w/Grounding · Hubs - w/Grounding - Stainless Steel · SSTC1. I. Conduit Sealing Fittings. 5", S65000CSHP, 1. 1 New Cooper Crouse Hinds ECD15 1/2" inch. • Barrier for sealing compound easily installed after dams are made and before compound is poured. Conduit & Enclosure Plugs. Material: brass, Overall Width: 1 inch. Step 4. Auto Drain / Plug. See 40% fill sealing fittings. 1" diameter; Made of corrosion-resistant brass. Conduit sealing that is installed in conduit runs to prevent the passage of gases, vapors or flames from one portion of the electrical installation to another Eaton's Crouse-Hinds series breather plug, condensation breather, and drain provides ventilation or drainage for enclosures or conduit systems. Its tough design provides high resistance against vibration and impacts. • UNY and UNF unions are used for joining conduit and connecting conduit to enclosures. Thomas & Betts (T&B) ECD15-TB Thomas & Betts ECD15-TB Drain. ◇ Indicated items in the shaded area www. Eaton Crouse Hinds PLG2 SA 3/4 Inch Copper Free Aluminum Recessed Head Conduit Plug. Each $16. • UNY and UNF unions are used for joining conduit and connecting conduit to enclosures. 563". Home · Conduit, Raceway & Strut · Conduit Fittings & Supports · Drains & Breathers; Thomas & Betts (T&B) ECD15-TB. • 781E for Ex e use • 781D for Ex d use • Drains equipment susceptible to moisture collection • Enables equipment to breathe • General purpose / industrial version available • Nylon Ex e only version available (-20?C to +60?C)Four Bolt Conduit Box cover with Drain plug positioned at the lowest position. 625". 3/4IN. 3", S63000CSHP, 1. Cooper Crouse-Hinds SSTC1 Drain Plug, Non-Hazardous, Size: 1/. Pipe Plugs. MFG Part #: PLG2 SA. Specifications. by Cooper Crouse-Hinds. Closure Plugs · Conduit Plugs · Knockout Hole Plugs. Zoom. To connect to the dishwasher drain, use a hammer to knock out and remove the drain plug from the inlet on the disposal. 2", S62500CSHP, 1. CRN75 Appleton Drain Type; Aluminum Material; 3/4 Inch Thread Size. • At least one breather should be used with each drain. conduit drain. inspection of seals